The Zenit 10 swimming pool robot is the entry-level model of the Zenit range for cleaning your swimming pool. The robot has Maytronics technology that ensures an excellent cleaning result. Maytronics is always progressive in developing and rediscovering the pool robots, so the Zenit ranges are the cream of the crop in terms of technology and cleaning. The Zenit robots no longer have the vacuum cleaner bags, but 2 cartridge filter holders with 4 filters have been installed. The coarse and fine filters are supplied as standard.
A holder for placing the robot and winding up the cable is included as standard. The Zenit 10 swimming pool robot has a cable length of 18 meters and is suitable for swimming pools up to 10 meters in length. The device only does the bottom and will therefore only drive up the wall to turn. The swivel ensures that the cable does not twist during use.
Cleaning the pool with the Dolphin Zenit 10
The swimming pool robot of the Maytronics range Zenit 10 ensures an excellent cleaning of your swimming pool floor. The robot has built-in a robust pump of 17 m³/h to maximize suction and to store the contamination in the filter cartridges. These cartridges must be cleaned by hand. A coarse and fine filter are included as standard and can be replaced at any time. The standard cycle is set to 3 hours, after which the robot simply shuts down. It should therefore be removed from the water to extend its life. When there is a lot of dirt in the water, the robot will fail if there is too much dirt in the filter cartridge, this as a safety measure against engine combustion.
What’s in the Zenit 10 basic package?
- Robot with PVC brushes
- 18 m floating cable with swivel
- Cart
- Fine and coarse filters
- transformer with plug
Maytronics swivel system
The Zenit 10 pool robot is equipped with a swivel on the floating cable, which ensures that the cable does not twist when using the robot. This innovative part ensures easy maintenance of your cable, guaranteeing a long life!
Filter cartridges
The Zenit range is equipped with removable filter cartridges. The cartridges are available in two different thicknesses. The coarse cartridges are mainly used in the spring to remove leaves and other coarse material, the fine filters are used all year round and have an equally fine filtration as the sand filters. The cartridges are easy to remove and can be rinsed with a garden hose. Always available separately.
Compare with other pool robots in the range
| Zenit 10 | Zenit 20 | Zenit 30 | Zenit 60 | |
| Maximum pool length | 10 meters | 15 meters | 15 meters | 15 meters |
| Floating cable length | 18 meters with swivel | 18 meters with swivel | 18 meters with swivel | 18 meters with swivel |
| Cleaned surface | Soil | Bottom, walls, waterline | Bottom, walls, waterline | Bottom, walls, waterline |
| Type of brushes | Combined brush | Combined brushes + double speed | Combined brushes + double speed | Combined brushes + double speed |
| Number of engines | 2 | 3 | 3 | 3 |
| Remote control | No | Application “MyDolphinPlus” | Yes + Application “MyDolphinPlus” | Yes + Application “MyDolphinPlus” |
| Transport trolley | No | Yes | Yes | Yes |
| Cleaning cycle | 3 hours | 2h30 | 1h30/2h30/3h30 | 1h/1h30/2h/2h30 |
| Weight | 9.5kg | 11kg | 11kg | 11.5kg |
| Guarantee | 2 years | 4 years | 4 years | 4 years |
| Watch robot | Watch robot | Watch robot |